Jacks and Cylinders

The universal hydraulic jack is equipped with a thread on the body, which allows you to fix the jack in any device. Hydraulic stem return allows the jack to be quickly set up for the next cycle.

Universal hydraulic jack with spring return of the rod. The presence of threads on the body and rod of the hydraulic jack and threaded holes in the base provides the ability to mount the jack in special devices

A hydraulic cargo jack with spring return is designed for lifting and moving cargo during assembly, dismantling and repair work.

The dock can be effectively used when working on horizontal movement of objects, when the hydraulic return of the rod allows you to quickly prepare the jack for the next cycle

Flexible multi-lip seals and high strength guide rings allow the hydraulic power cylinder to operate with significant radial rod loads

The jacks are equipped with a safe mechanical load support system: a safety nut allows you to fix the load in a raised position for a long time

The hydraulic aluminum jack is almost half the weight of steel jacks of the same capacity. The jack is intrinsically safe, can be used in explosion and fire hazardous places

Lightweight jack with a secure mechanical load support system - equipped with a safety nut

Made of high-strength light alloy, half the weight of a jack of the same capacity, made of steel

Hydraulic cylinders manufactured by ENERPRED are designed for lifting or moving loads when performing assembly and disassembly, repair and other types of work in various industries.

The jack is specially made for work in places with a narrow opening, the low height of the jack allows it to be used in confined spaces

The low design of this series of jacks allows them to be used in confined spaces.

Designed to create pulling force when performing repair, installation, assembly works and weights replacement.

Designed for lifting, positioning of equipment, heavy steel frameworks, supporting heavy-loaded frames and other weights, as well as for repair, installation, dismantling, assembly, transport and storage operations, etc.

Designed for lifting and handling weights, and hollow plunger makes them suitable for pressing and removing parts installed with interference on long shafts, tendon cylindering, ropes tension, etc.

The design of the rod provides a large lifting height with small overall dimensions of the hydraulic telescopic jack

Made of high-alloy, two times lighter jack of the same capacity, made of steel.

The unique system allows to raise weight to the height and fix it in the up position for a long time.

Designed to create pulling force when performing repair, installation, assembly works and weights replacement.

Подкатные домкраты серии предназначены для подъема карьерной техники, железнодорожных вагонов и другой тяжелой техники

Designed for lifting loads during installation and gauging of heavy equipment, machinery, maintenance and repair of vehicles, etc.

Designed for lifting and moving of cargo load during assembling, dismantling and repairing operations in various industries.

Have built-in pump with a removable handle, equipped with an additional screw to compensate for the distance between the support and the load, effectively avoiding the installation of additional pads.

Designed to lift and move the load when performing assembly and dismantling, repair and other types of work in different industries

The jack is designed for lifting and moving cargo during assembly, dismantling, repair work in various industries.

The DG200G130D and DG300P130D jacks are designed to lift and hold the support ring of the cone crusher during repair and maintenance work.